LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
1. INSTALL MOBILEPHONE BRACKET
(a) Install the 2 mobilephone brackets with the 4 bolts.
2. INSTALL MAYDAY ECU
(a) Install the ECU with the nut.
(b) Connect the 4 connectors and 2 clamps.
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
5. INSTALL REAR FLOOR FINISH PLATE
6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
8. INSTALL DECK TRIM SIDE BOARD RH
9. INSTALL ROPE HOOK
10. INSTALL ROPE HOOK ASSEMBLY
11. INSTALL BATTERY SERVICE HOLE COVER See: Hybrid Drive Systems/Battery System, Hybrid Drive/Hybrid Battery Service Switch
12. INSTALL NO. 1 COOLER COVER See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air Conditioning Unit (for
Rear Side)/Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
14. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
15. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
16. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
17. PERFORM REGISTRATION
(a) Perform registration See: Testing and Inspection/Programming and Relearning.
NOTE: When replacing the mayday battery or the mayday ECU (together with mayday battery), perform registration.