LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
NOTICE:
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
4. REMOVE BATTERY SERVICE HOLE COVER
5. REMOVE SERVICE PLUG GRIP See: Hybrid Drive Systems/Battery System, Hybrid Drive/Hybrid Battery Service Switch/Service and
Repair/Removal
6. REMOVE ROPE HOOK
7. REMOVE ROPE HOOK ASSEMBLY
8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
9. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Removal
10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
11. REMOVE REAR FLOOR FINISH PLATE
12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
13. DISCONNECT REAR ACTIVE STABILIZER CONTROL ACTUATOR CONNECTOR
(a) Detach the wire harness clamp.
(b) Disconnect the actuator connector labeled A.
(c) Disconnect the actuator connector labeled B.
(1) Release the lever's lock. (*1)