lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Front Active Stabilizer Control ECU|Page 703 > < Front Active Stabilizer Control ECU|Page 701
Page 7
background image

(b) Connect the ECU connectors.
(c) w/o Advanced Parking Guidance System:

Connect the ECU connectors to the clearance warning ECU.

(d) w/ Advanced Parking Guidance System:

Connect the ECU connectors to the parking assist ECU.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Installation

                 

4. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service

and Repair/Installation

                 

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and

Repair/Driver Side Knee Airbag Assembly/Installation

                 

6. INSTALL LOWER INSTRUMENT PANEL See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Front Passenger Side Knee

Airbag Assembly/Installation

                 

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /

Instrument Panel/Service and Repair/Installation

                 

8. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Installation

                 

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Installation

                 

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.6 Nm (57 kgf-cm, 50 in-lbf)

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.

11. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery

                 

12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

                 

13. ADJUST VEHICLE HEIGHT

NOTE: If the suspension control ECU has been replaced, be sure to adjust the vehicle height.

(a) Adjust the vehicle height See: Steering and Suspension/Suspension/Adjustments.

14. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

15. ADJUST HEADLIGHT ASSEMBLY

(a) for HID Headlight:

Adjust the headlight  See: Lighting and Horns/Headlamp/Adjustments/Headlight Assembly (for HID Headlight).

(b) for LED Headlight:

Adjust the headlight  See: Lighting and Horns/Headlamp/Adjustments/Headlight Assembly (for LED Headlight).

Front Active Stabilizer Control ECU|Page 703 > < Front Active Stabilizer Control ECU|Page 701