LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(a) Perform a diagnostic system check See: Service and Repair/Steering Pad/Disposal.
(b) With the rear seat side airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the rear seat
with a new one:
Cuts, minute cracks or marked discoloration on the rear seatback around the rear seat side airbag.
2. CHECK REAR SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check See: Service and Repair/Steering Pad/Disposal.
(b) With the rear seat side airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the rear
seat side airbag with a new one:
-
Cuts, minute cracks or marked discoloration on the rear seat side airbag.
-
Cracks or other damage to the wire harness or connector.
NOTE: For removal and installation procedures of the rear seat side airbag, be sure to follow the correct procedure.
SRS Seat Cushion Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEM: SRS SEAT CUSHION AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. CHECK SRS SEAT CUSHION AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.
(b) With the SRS seat cushion airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the rear
seat cushion with a new one:
Cuts, minute cracks or marked discoloration on the front seatback around the SRS seat cushion airbag.
2. CHECK SRS SEAT CUSHION AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)