LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
2. REMOVE BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
NOTICE:
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
5. REMOVE SWITCH AND VOLUME CASE See: Air Bag/Service and Repair/Steering Pad/Removal
6. REMOVE LOWER NO. 2 STEERING WHEEL COVER See: Air Bag/Service and Repair/Steering Pad/Removal
7. REMOVE STEERING PAD See: Air Bag/Service and Repair/Steering Pad/Removal
8. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal
9. REMOVE STEERING COLUMN COVER (w/o Driver Monitor Camera) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal
10. REMOVE STEERING COLUMN COVER (w/ Driver Monitor Camera) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal
11. REMOVE SPIRAL CABLE SUB-ASSEMBLY