LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
2. INSTALL FRONT SEAT SHOULDER BELT GUIDE
(a) Install the belt guide with the 2 screws.
NOTE: Make sure the belt is not pinched as this may damage the belt.
3. INSTALL CENTER UPPER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
4. INSTALL CENTER LOWER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL REAR DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL FRONT DOOR SCUFF PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. INSTALL FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
8. CONNECT FRONT SEAT OUTER BELT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
10. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
12. CHECK SRS WARNING LIGHT See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
13. INSPECT FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation