LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
NOTICE:
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE REAR SEAT ASSEMBLY
(a) Remove the rear seat ( See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal).
5. REMOVE REAR SEAT INNER BELT ASSEMBLY RH
(a) Remove the bolt and belt.
6. REMOVE REAR SEAT INNER BELT ASSEMBLY LH
(a) Remove the bolt and belt.
Installation
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for Ottoman): INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH
(a) Install the seat belt with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)