LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
CAUTION: Do not apply battery voltage to the pretensioner connector.
(1) Connect the battery's positive (+) lead to terminal 1 (IG) of the tension reducer connector and the negative (-) lead to terminal 2 (L).
(2) Check that an operating sound is heard when the magnetized solenoid is attracting the plunger.
(3) Pull out the seat belt and let it retract. Listen to the operating sound.
(4) Pull out the seat belt again, disconnect the battery's negative (-) lead and let it retract. Listen to the operating sound again and check that the
operating sound volume has increased.
If the result is not as specified, replace the outer belt assembly.
(c) for Passenger's Seat only:
Check the fastening function of the child restraint system.
NOTE: The check should be performed with the outer belt installed.
(1) When the belt is pulled out fully, the belt should automatically start to retract.
(2) After the belt has fully retracted, the belt should be able to be pulled out and retracted again.
If the operation is not as specified, replace the belt assembly.