LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Hood Sensor/Switch (For Alarm): Service and Repair
Installation
THEFT DETERRENT: ENGINE HOOD COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL HOOD LOCK ASSEMBLY
(a) Apply MP grease to the sliding areas of the lock.
(b) Connect the hood lock control cable.
(c) Install the hood lock with the 2 bolts and nut.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(d) Install a new cap.
2. INSTALL FRONT FENDER PROTECTOR UPPER LH See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service
and Repair/Installation
3. INSTALL HOOD LOCK CONTROL CABLE COVER
(a) Attach the claw to install the cover.
(b) Install the 3 screws.
4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Sensors and Switches - Accessories and Optional Equipment/Distance
Sensor/Service and Repair/Installation
5. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Sensors and Switches - Accessories and Optional Equipment/Distance
Sensor/Adjustments
6. INSTALL RADIATOR GRILLE ASSEMBLY See: Body and Frame/Grille/Service and Repair/Installation
7. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Installation