LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front
Console Box/Removal
2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front
Console Box/Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console
Box/Removal
4. REMOVE NO. 3 BOX PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console Box/Removal
5. REMOVE REAR UPPER CONSOLE PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console
Box/Removal
6. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
(a) Disconnect the connector.
(b) Detach the 4 claws and remove the integration control and panel.
Installation
SEAT: REAR SEAT RETURN SWITCH: INSTALLATION
INSTALLATION
1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
(a) Attach the 4 claws to install the integration control and panel.
(b) Connect the connector.
2. INSTALL REAR UPPER CONSOLE PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console
Box/Installation
3. INSTALL NO. 3 BOX PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console Box/Installation
4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Console
Box/Installation