LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE REAR CENTER SEAT CUSHION ASSEMBLY (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly
(for Power Seat)/Removal
2. REMOVE REAR CENTER SEATBACK ASSEMBLY (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Power Seat)/Removal
3. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly (for Power Seat)/Disassembly
4. REMOVE REAR CENTER NO. 1 SEAT ARMREST PANEL (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat
Assembly (for Power Seat)/Disassembly
5. REMOVE CURTAIN SWITCH ASSEMBLY (for Power Seat)
(a) Remove the 8 screws and rear No. 2 seat center armrest box.
(b) Remove the 2 screws and curtain switch.
(c) Disconnect the connector.
Installation
SEAT: SEAT CLIMATE CONTROL SWITCH (for Rear Side): INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL CURTAIN SWITCH ASSEMBLY (for Power Seat)
(a) Connect the connector.