LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Variable Valve Timing Actuator Position Sensor: Service and Repair
Removal
2UR-FSE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL
REMOVAL
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
3. REMOVE NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE AIR CLEANER ASSEMBLY LH See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Removal
5. REMOVE AIR CLEANER ASSEMBLY RH See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Removal
6. REMOVE VVT SENSOR
(a) Disconnect the 4 sensor connectors.
(b) Remove the 4 bolts and 4 sensors.