LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-420003.png)
Standard resistance:
NG -- REPLACE STOP LIGHT SWITCH ASSEMBLY
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (BATTERY - STOP LIGHT SWITCH)
(a) Disconnect the A35 switch connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. CHECK HARNESS AND CONNECTOR (STOP LIGHT SWITCH - REAR JUNCTION BLOCK ECU)
(a) Disconnect the S62 ECU connector.
(b) Disconnect the A35 switch connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
