LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Removal
2UR-FSE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
3. REMOVE NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal
5. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal
6. REMOVE NO. 1 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
7. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the sensor connector.
(b) Remove the sensor.
(c) Remove the gasket from the sensor.