LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Ignition Switch: Service and Repair
Installation
2UR-FSE STARTING: POWER SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER SWITCH
(a) Attach the 2 claws to install the switch.
(b) Connect the switch connector.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
3. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
6. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY