LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
NOTICE:
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE REAR SEAT CUSHION ASSEMBLY LH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Power Seat)/Removal
5. REMOVE REAR SEAT CUSHION ASSEMBLY (for Ottoman)
(a) Remove the rear seat cushion assembly LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
(b) Remove the rear seat cushion assembly RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
6. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Fixed Seat Type)/Removal
7. REMOVE REAR SEATBACK ASSEMBLY LH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power
Seat)/Removal
8. REMOVE REAR SEATBACK ASSEMBLY CENTER (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Power Seat)/Removal
9. REMOVE REAR SEATBACK ASSEMBLY (for Ottoman)
(a) Remove the rear seatback assembly LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
(b) Remove the rear seatback assembly RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
10. REMOVE REAR SEATBACK ASSEMBLY LH (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Fixed Seat Type)/Removal
11. REMOVE REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE REAR SEAT SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE REAR AIRBAG SENSOR
(a) Remove the bolt and rear airbag sensor.
(b) Disconnect the connector.
Installation
SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: INSTALLATION
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.