LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
NOTICE:
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
4. REMOVE FRONT WHEEL LH
5. DISCONNECT SKID CONTROL SENSOR WIRE
(a) Remove the bolt and detach the 2 clips.
6. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Disconnect the connector.
(b) Remove the bolt and disconnect the height control sensor link from the front No. 2 suspension lower arm LH.
(c) Remove the 2 bolts and height control sensor.
NOTE: Do not drop the height control sensor. If it is dropped, replace it with a new one.
Installation