LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-2139007.png)
(a) Connect the ECU connector.
(1) Connect the ECU connector. (*1)
(2) Rotate the lever in the direction of the arrow until a "click" sound is heard. (*2)
(3) Lock the lever's lock. (*3)
(b) Install the ECU with the 2 bolts.
Torque: 14 Nm (138 kgf-cm, 10 ft-lbf)
2. CONNECT REAR ACTIVE STABILIZER CONTROL ACTUATOR CONNECTOR
(a) Connect the actuator connector labeled A.
(b) Connect the actuator connector labeled B.
(1) Connect the actuator connector. (*1)
(2) Rotate the lever in the direction of the arrow until a "click" sound is heard. (*2)
(3) Lock the lever's lock. (*3)
