LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-2218001.png)
Tilt Wheel Switch: Service and Repair
Installation
STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: INSTALLATION
INSTALLATION
1. INSTALL TILT AND TELESCOPIC MANUAL SWITCH
(a) Attach the claw to install the tilt and telescopic manual switch.
(b) Connect the connector.
2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)
(a) Attach the claw to install the upper steering column cover.
(b) Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.
(c) Attach the 2 claws to install the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.
(d) Install the screw.
Torque: 2.0 Nm (20 kgf-cm, 18 in-lbf)
