LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Arm/Installation
37. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
38. TEMPORARILY INSTALL TOE CONTROL LINK SUB-ASSEMBLY LH See: Rear Knuckle Alignment Link/Service and Repair/Installation
39. TEMPORARILY INSTALL TOE CONTROL LINK SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
40. TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY LH See: Rear Knuckle Alignment Link/Service and Repair/Installation
41. TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
42. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Control Arm/Service and Repair/Rear Lower
Arm/Installation
43. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
44. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Control Arm/Service and Repair/Rear Lower Arm/Installation
45. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
46. TEMPORARILY INSTALL PNEUMATIC CYLINDER REAR WITH SHOCK ABSORBER ASSEMBLY LH See: Control Arm/Service and
Repair/Rear Upper Arm/Installation
47. TEMPORARILY INSTALL PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER RH
HINT: Use the same procedures described for the LH side.
48. INSTALL REAR STABILIZER LINK ASSEMBLY LH
(a) Install the stabilizer link with the nut to the No. 2 suspension arm.
Torque: 26 Nm (265 kgf-cm, 19 ft-lbf)
49. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
50. INSTALL LOAD SENSING VALVE SENSOR BRACKET See: Sensors and Switches - Suspension/Ride Height Sensor/Service and
Repair/Height Control Sensor (for Rear LH)/Installation
51. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH See: Sensors and Switches - Suspension/Ride Height Sensor/Service and
Repair/Height Control Sensor (for Rear LH)/Installation
52. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
53. INSTALL SKID CONTROL SENSOR WIRE See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed