Lexus Workshop Service and Repair Manuals

22. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine Assembly/Installation

23. INSTALL SERVICE PLUG GRIP See: Hybrid Drive Systems/Battery System, Hybrid Drive/Hybrid Battery Service Switch/Service and

Repair/Installation

24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.6 Nm (57 kgf-cm, 50 in-lbf)

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.

25. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery

26. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

27. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

28. ADJUST HEADLIGHT ASSEMBLY

(a) for HID Headlight:

Adjust the headlight  See: Lighting and Horns/Headlamp/Adjustments/Headlight Assembly (for HID Headlight).

(b) for LED Headlight:

Adjust the headlight  See: Lighting and Horns/Headlamp/Adjustments/Headlight Assembly (for LED Headlight).