LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(c) Attach the wire harness clamp.
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
4. INSTALL REAR FLOOR FINISH PLATE
5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
7. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Installation
8. INSTALL ROPE HOOK ASSEMBLY
9. INSTALL ROPE HOOK
10. INSTALL SERVICE PLUG GRIP See: Hybrid Drive Systems/Battery System, Hybrid Drive/Hybrid Battery Service Switch/Service and
Repair/Installation
11. INSTALL BATTERY SERVICE HOLE COVER
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.6 Nm (57 kgf-cm, 50 in-lbf)
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
13. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
14. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
15. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.