LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(d) Remove the bolt, nut and bracket.
12. REMOVE SUSPENSION CONTROL ECU
(a) Remove the 2 nuts and suspension control ECU from the bracket.
-
Avoid any impact to the suspension control ECU.
-
Do not drop the ECU. If it is dropped, replace it with a new one.
Installation
SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL SUSPENSION CONTROL ECU
(a) Install the suspension control ECU to the bracket with the 2 nuts.
Torque: 6.0 Nm (61 kgf-cm, 53 in-lbf)
-
Avoid any impact to the suspension control ECU.
-
Do not drop the ECU. If it is dropped, replace it with a new one.
2. INSTALL SUSPENSION CONTROL ECU WITH BRACKET
(a) Install the ECU with bracket with the nut and bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)