LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(b) Attach the 2 claws, and install the wire harness to the suspension member.
3. INSTALL REAR STABILIZER LINK ASSEMBLY LH
(a) Install the stabilizer link with the nut and bolt.
Torque: 26 Nm (265 kgf-cm, 19 ft-lbf)
(b) Install the stabilizer link with the nut.
Torque: 89 Nm (908 kgf-cm, 66 ft-lbf)
4. INSTALL REAR STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
5. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a) Support the rear suspension member with an engine lift and attachments.
CAUTION:
-
As the rear suspension member is very heavy, securely support it with an engine lifter with attachments.
-
Perform this procedure with several people supporting the rear suspension member so that it does not tilt or fall.