LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(b) Install the absorber control actuator to the actuator support bracket.
(c) Turn the actuator clockwise approximately 40° until a click is felt.
NOTICE:
-
Before turning the actuator, make sure to check that the actuator output shaft and control rod are securely connected.
-
Do not turn the actuator more than 40°.
-
Do not drop the absorber control actuator. If it is dropped, replace it with a new one.
2. INSTALL REAR SHOCK ABSORBER CAP
(a) Connect the connector to the absorber control actuator.
(b) Install the absorber cap with the 3 nuts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
(c) Connect the wire harness to the absorber cap.
3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY See: Windows and Glass/Windows/Window Shade/Service and Repair/Rear Sunshade
Assembly/Installation
4. INSTALL INNER ROOF SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL INNER ROOF SIDE GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL REAR SEAT SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. INSTALL REAR SEAT SIDE GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
8. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed
Seat Type)/Installation
11. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Fixed Seat Type)/Installation
12. INSTALL REAR CENTER SEATBACK ASSEMBLY (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Power Seat)/Installation