LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-1717002.png)
(a) Remove the bolt and oil deflector from the rear differential carrier cover.
4. FIX REAR DIFFERENTIAL CARRIER ASSEMBLY TO OVERHAUL STAND
(a) Set the differential carrier to an overhaul stand as shown in the illustration.
HINT: Install the differential carrier with the back surface of the ring gear facing the overhaul stand as shown in the illustration.
5. INSPECT DIFFERENTIAL RING GEAR RUNOUT
(a) Place a dial indicator so that it is perpendicular to the back surface of the ring gear.
(b) Rotate the ring gear and measure the ring gear runout.
Maximum runout:
0.05 mm (0.00197 in.)
HINT: For reassembly purposes, record the result before disassembly.
If the runout exceeds the specified maximum value, remove the ring gear and check the runout of the differential case.
6. INSPECT DIFFERENTIAL RING GEAR BACKLASH
(a) Place a Place a dial indicator so that it is perpendicular to the top of the ring gear on the tooth side.
