LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(j) Using a plastic-faced hammer, lightly tap the ring gear tooth side of the differential carrier to stabilizer the differential case bearing.
(k) Install a dial indicator to the differential carrier.
(l) Tighten SST bolt to alter the differential carrier's shape approximately 0.1 mm (0.00394 in.).
SST: 09571-50010
NOTE: Observe the dial indicator to ensure that the shape of the differential carrier does not change more than 0.2 mm (0.00787 in.)
HINT:
-
Try to set the dial indicator as close as possible to the differential carrier cover side (upper side in illustration) of the differential case
bearing outer race.
-
Tighten SST bolt to apply the preload to the case bearing.