LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
15. REMOVE FRONT SPEED SENSOR RH
HINT: Use the same procedures described for the LH side.
16. DISCONNECT TIE ROD ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
17. DISCONNECT TIE ROD ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
18. DISCONNECT FRONT NO. 1 SUSPENSION UPPER ARM ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
19. DISCONNECT FRONT NO. 1 SUSPENSION UPPER ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
20. DISCONNECT FRONT NO. 2 SUSPENSION UPPER ARM ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
21. DISCONNECT FRONT NO. 2 SUSPENSION UPPER ARM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
22. REMOVE FRONT AXLE ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
23. REMOVE FRONT AXLE ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
24. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(a) Using SST, remove the front drive shaft assembly.
SST: 09520-01010
SST: 09520-24010
09520-32040
-
Be careful not to damage the drive shaft boot, dust cover and oil seal.
-
Be careful not to drop the drive shaft assembly.
25. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
(a) Remove the bolt and disconnect the wire harness bracket.