LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(c) Operation Check See: Component Tests and General Diagnostics/Rear Door Sunshade System
(d) Initialization See: Programming and Relearning/Rear Door Sunshade System
NEXT -- Continue to next step.
7. REPAIR OR REPLACE
NEXT -- Continue to next step.
8. CONFIRMATION TEST
NEXT -- END
Rear Sunshade System
INTERIOR: REAR SUNSHADE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
-
Use these procedures to troubleshoot the rear sunshade system.
-
*: Use the intelligent tester or Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.
3. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Use the intelligent tester or Techstream to check if the CAN Communication System is functioning normally.
Result
B -- Go to CAN COMMUNICATION SYSTEM
A -- Continue to next step.
4. INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
(a) Use the intelligent tester or Techstream to check if the LIN Communication System is functioning normally.
Result
B -- Go to LIN COMMUNICATION SYSTEM
A -- Continue to next step.
5. PROBLEM SYMPTOMS TABLE
(a) Refer to the problem symptoms table See: Symptom Related Diagnostic Procedures/Rear Sunshade System/Problem Symptoms Table.
Result
B -- Go to step 7
A -- Continue to next step.