LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC OUTPUT
(a) Check the DTCs See: Reading and Clearing Diagnostic Trouble Codes/Rear Sunshade System.
Result
C -- GO TO LIN COMMUNICATION SYSTEM
B -- GO TO CAN COMMUNICATION SYSTEM
A -- Continue to next step.
2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER OR TECHSTREAM (SUNSHADE OPERATION)
(a) Select the Active Test, use the intelligent tester or Techstream to generate a control command, and then check that the shade raises/lowers.
(1) Intelligent tester
BODY NO. 4
(2) Techstream
Body No. 4
OK:
Rear sunshade raises or lowers
NG -- INSPECT FUSE (RR S/SHADE)
OK -- Continue to next step.
3. READ VALUE USING INTELLIGENT TESTER OR TECHSTREAM (STATUS OF REAR SUNSHADE CLOSE)