LX 570 V8-5.7L (3UR-FE) (2010)
HINT
Use the same procedure to remove the No. 3 ultrasonic sensor retainer on the other side.
(a) Detach the claw and remove the ultrasonic sensor retainer from the rear bumper cover.
Installation
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear): INSTALLATION
1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
HINT
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
(a) Align the keyhole and protrusion as shown in the illustration.
(b) Install the ultrasonic sensor retainer to the rear bumper.
NOTICE:
Do not damage the bumper with the protrusion when installing the retainer.
2. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER
HINT
Use the same procedure to install the No. 3 ultrasonic sensor retainer on the other side.
(a) Attach the claw to install the ultrasonic sensor retainer as shown in the illustration.
3. INSTALL NO. 2 ULTRASONIC SENSOR