lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3429 > < Initial Inspection and Diagnostic Overview|Page 3427
Page 41
background image

NG --  REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO CENTER AIRBAG SENSOR (CANH, CANL)

OK --  REPLACE CENTER AIRBAG SENSOR ASSEMBLY  See: Relays and Modules/Relays and Modules - Restraint Systems/Air
Bag Control Module/Service and Repair/Removal

9. CHECK FOR SHORT TO GND IN CAN BUS WIRE (AFS ECU)

(a) Disconnect the E91 AFS ECU (headlight swivel ECU) connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG --  REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO AFS ECU (CANH, CANL)

OK --  REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY)  See: Lighting and Horns/Headlamp/Headlamp Alignment
Control Module/Service and Repair/Removal

10. CHECK FOR SHORT TO GND IN CAN BUS WIRE (ECM)

(a) Disconnect the A38 ECM connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Initial Inspection and Diagnostic Overview|Page 3429 > < Initial Inspection and Diagnostic Overview|Page 3427