RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Splice Point
J: Indicates a wiring Splice Point (Codes are "E" for the Engine Room, "I" for the Instrument Panel, and "B" for the Body).
The Location of Splice Point I 5 is indicated by the shaded section.
K: Indicates a shielded cable.
Pin Number Of The Connector
L: Indicates the pin number of the connector. The numbering system is different for female and male connectors.
Example: Numbered in order
Numbered in order
from upper left to
from upper right to
lower right
lower left
M: Indicates a ground point.
The first letter of the code for each ground point(s) indicates the component's location, e.g, "E" for the Engine Compartment, "I" for the Instrument
Panel and Surrounding area, and "B" for the Body and Surrounding area.
N: Page No.