RX 300 FWD V6-3.0L (1MZ-FE) (1999)
4. BLEED BRAKE LINE
a. Slowly depress the brake pedal several times.
b. While an assistant depresses the pedal, loosen the bleeder plug until fluid starts to run out. Then tighten the bleeder plug.
c. Repeat this procedure until there are no more air bubbles in the fluid.
Torque: (Bleeder plug) 8.3 Nm (85 kgf.cm, 74 inch lbs.)
5. REPEAT PROCEDURE FOR EACH WHEEL
6. CHECK FLUID LEVEL IN BRAKE RESERVOIR
Check the fluid level and add fluid if necessary.