RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-635004.png)
Remove the 6 bolts and cooling fan.
Torque: 5.0 Nm (50 kgf-cm, 44 inch lbs.)
DISASSEMBLY
1. REMOVE FAN
Remove the nut and fan.
2. REMOVE FAN MOTOR
a. Disconnect the wire and connector holder from the fan shroud.
b. Remove the 3 screws and fan motor.
REASSEMBLY
1. INSTALL FAN MOTOR
