RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Connecting Rod: Specifications
Connecting Rod Bolt
Connecting Rod Bolts
Standard Diameter ....................................................................................................................................................... 7.2 - 7.3 mm (0.284 - 0.287 inch)
Minimum Diameter .......................................................................................................................................................................... 7.0 mm (0.276 inch)
Tightening torque:
Step 1 ............................................................................................................................................................................................. 24.5 Nm (18 ft lb)
Step 2 ............................................................................................................................................................................................................ Turn 90°
-
Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
-
Install and alternately tighten the 2 connecting rod cap bolts in several passes.