RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Fuel Pressure: Testing and Inspection
CHECK FUEL PRESSURE
a. Check the battery positive voltage is above 12 V.
b. Disconnect the negative (-) terminal cable from the battery.
c. Purchase the new No.1 fuel pipe and take out the fuel tube connector from its pipe.
Part No.23801-20040
d. Remove the fuel hose clamp.
e. Disconnect the No.1 fuel pipe (fuel tube connector) from the fuel filter outlet.
CAUTION:
-
Perform disconnecting operations of the fuel tube connector (quick type) after observing the precautions.
-
As there is retained pressure in the fuel pipe line, prevent it from splashing inside the engine compartment.