RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-430004.png)
Loosen the 2 bolts, and remove the drive belt.
7. REMOVE CRUISE CONTROL ACTUATOR
8. DISCONNECT GROUND STRAP CONNECTORS
9. REMOVE ENGINE MOVING CONTROL ROD AND NO.2 RH ENGINE MOUNTING BRACKET
10. REMOVE NO.2 GENERATOR BRACKET
a. Loosen the generator pivot bolt.
b. Remove the nut and bracket.
11. REMOVE CRANKSHAFT PULLEY
a. Using Special Service Tool (SST), remove the pulley bolt.
SST 09213-54015 (91651-60855), 09330-00021
b. Using SST, remove the pulley.
SST 09950-50010 (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05020)
12. REMOVE NO.1 TIMING BELT COVER
