RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-873001.png)
Engine Control Module: Technical Service Bulletins
ECM/TCM - Diagnostic Tester Reset Memory Function
TRANSMISSION & CLUTCH
TC005-98
Title:
RESET MEMORY FUNCTION
Models:
'99 ES 300, '99 RX 300
December 25, 1998
Introduction
Diagnostic Tester Software beginning with Version 5.1a-1 provides a "Reset Memory" function which should be used to reset ECM "Learned Values"
after Transmission replacement or overhaul, and/or ECM replacement.
Caution:
Failure to perform this function may cause an increase in the time to readjust the "Learned Values".
Procedure
