RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-967001.png)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE RH FENDER APRON SEAL
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Remove the bolt and disconnect the crankshaft position sensor.
Torque: 8 Nm (80 kg.cm 69 in.lb)
b. Disconnect the crankshaft position sensor connector.
INSTALLATION
Installation is in the reverse order of removal.
