RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Ignition Coil: Service and Repair
Ignition Coil
REMOVAL
1. DISCONNECT CONNECTORS FROM IGNITION COILS
2. REMOVE IGNITION COILS
a. Disconnect the 3 connectors from the ignition coil.
b. Remove the 3 bolts and 3 ignition coils from the LH cylinder head.
NOTE: It may be necessary to remove the hood cowl in order to access the firewall-facing coils.
Torque: 8 N.m (80 kgf.cm, 69 in.lbf)
HINT: Arrange the ignition coils in correct order.
INSTALLATION
Installation is in the reverse order of removal.