RX 300 FWD V6-3.0L (1MZ-FE) (1999)
^
Inspect the Body ECU label and/or corner of ECU to determine if it requires replacement as shown.
6.
BODY ECU REPLACEMENT
NOTE:
Replacement is only required if the ECU fails inspection. See step 5.
(a)
Remove the 2 nuts and Body ECU.
(b)
Disconnect the 4 connectors and remove the Body ECU.
(c)
Connect the 4 connectors and install the new Body ECU with the 2 new nuts supplied.
7.
REINSTALL LOWER INSERT
^
Engage the two clips and reinstall the lower insert with the 2 bolts.
NOTE:
Align the lower bolt holes of the lower insert with the bolt holes in the body; tighten the 2 bolts to affix the lower insert.