RX 300 FWD V6-3.0L (1MZ-FE) (1999)
^
Reset the memory function for the clock and radio.
11.
RESET MEMORY SEAT POSITION # 1
12.
REGISTER TRANSMITTER RECOGNITION CODE TO NEW BODY ECU
(a)
Register the key transmitter recognition code (for all the customer's transmitters) to the new Body ECU when the body ECU is replaced.
(b)
Refer to the registration procedure and register it in the Add mode.
G.
REGISTER PROCEDURE
1.
REGISTRATION MODE
To register the customer's key transmitters to the new Body ECU, only the Add mode will be required. However all modes are shown for you
reference. They include:
Add
The Add mode is used to retain codes already registered and allows you register new recognition codes. This mode is used when adding a
transmitter. The Body ECU will register a maximum of 4 recognition codes, if the number of registered codes exceeds 4, previously registered
codes are erased in order, starting from the first registered code.
Rewrite
The Rewrite mode erases all previously registered codes and allows the registration of up to the limit of 4 recognition codes.
Prohibition
The Prohibition mode is used to erase all registered codes and cancels the wireless door lock function. Use this mode when the transmitter is lost.
Confirmation
The Confirmation mode is for confirming the number of recognition codes, before registering additional codes.
2.
REGISTER KEY TRANSMITTERS