RX 300 FWD V6-3.0L (1MZ-FE) (1999)
b. Remove the 4 screws and remove the front seat cushion shield and front power adjuster shield.
c. Remove the 3 screws and front seat cushion inner shield.
d. Remove the wire harness of the side airbag assembly from the seat cushion assembly.
NOTE: Be careful not to damage the airbag wire harness.
e. Remove the 4 bolts and seat cushion assembly.
f.
Remove the 3 screws and reclining adjuster inside cover.
g. Remove the wire harness of the side airbag assembly from the reclining adjuster inside cover.
NOTE: Be careful not to damage the airbag wire harness.
7. REMOVE SIDE AIRBAG ASSEMBLY
Remove the 2 nuts and side airbag assembly.
CAUTION:
-
Do not store the side airbag assembly with the airbag deployment direction facing down.
-
Never disassemble the side airbag assembly.
Installation
NOTE: Never use airbag parts from another vehicle. When replacing parts, replace them with new parts.