RX 300 FWD V6-3.0L (1MZ-FE) (1999)
1. REMOVE LOWER FINISH PANEL
a. Remove the front door scuff plate LH.
b. Remove the clip and cowl side trim LH.
c. Remove the lower finish plate.
d. Remove the lower center finish panel.
e. Remove the 2 bolts and lower finish panel.
f.
Disconnect the hook lock control cable.
2. REMOVE LOWER NO.2 PANEL
a. Remove the front door scuff plate RH.
b. Remove the clip and cowl side trim RH.
c. Remove the No.2 under cover.
d. Remove the 2 bolts, 2 screws and lower No.2 panel.
3. REMOVE FLOOR SHIFT ASSEMBLY
a. Remove the center lower cluster finish panel.