RX 300 FWD V6-3.0L (1MZ-FE) (1999)
Air Bag Control Module: Service and Repair
Side Airbag Sensor Assembly
Replacement Requirements
REPLACEMENT REQUIREMENT
In the following cases, replace the side airbag sensor assembly.
-
If the side airbag sensor assembly has been deployed in a collision.
-
If the side airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the side airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the side airbag sensor assembly.
Removal
NOTE: Do not open the cover or the case of the ECU and various