RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-1698001.png)
Wheel Bearing: Testing and Inspection
INSPECTION
1. INSPECT TIRE
a. Check the tires for wear and proper inflation pressure.
Cold tire inflation pressure
b. Check the tire runout.
Tire runout: 1.0 mm (0.039 inch) or less
2. ROTATING TIRES
HINT: See the illustration for where to rotate each tire.
3. INSPECT WHEEL BALANCE
a. Check and adjust the Off-the-car balance.
b. If necessary, check and adjust the On-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lbs.) or less
