RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1671002.png)
8. CLEAN BACK DOOR GLASS
a. Clean the outer circumference of the glass with white gasoline.
NOTE:
-
Do not touch the glass surface after cleaning it.
-
Be careful not to damage the glass.
9. INSTALL BACK WINDOW MOULDING
a. Coat the installation part of the mouldings with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not apply too much primer.
b. Install a new mouldings, applying double-sided tape all the way around the glass except where the mouldings is installed, as shown in the
illustration.
