RX 330 AWD V6-3.3L (3MZ-FE) (2004)
a. Using a clip remover, remove the 2 clips and deck floor box.
21. REMOVE DECK BOARD SUB-ASSEMBLY NO. 2
a. Remove the 4 nuts and deck board.
22. REMOVE DECK BOARD SUB-ASSEMBLY NO. 3
a. Remove the 2 nut and deck board.
23. REMOVE BACK DOOR WEATHERSTRIP
24. REMOVE DECK SIDE TRIM BOX RH
a. Remove the clip.
b. Using a clip remover, remove the 2 clips and deck side trim box.
25. REMOVE DECK SIDE TRIM BOX LH
HINT: Use the same procedures described for the RH side.
26. REMOVE REAR FLOOR FINISH PLATE
a. Using a clip remover, remove the 2 clips and finish plate.
27. REMOVE REAR FLOOR FINISH SIDE PLATE RH
a. Using a clip remover, remove the clip.
b. Using a screwdriver, disengage the 2 clips and remove the floor finish side plate.
HINT: Tape the screwdriver tip before use.
28. REMOVE REAR FLOOR FINISH SIDE PLATE LH
HINT: Use the same procedures described for the RH side.
29. REMOVE DECK SIDE TRIM COVER RH
a. Using a moulding remover, disengage the 5 claws and remove the trim cover by pulling it to inside the vehicle.
30. REMOVE DECK SIDE TRIM COVER LH
HINT: Use the same procedures described for the RH side.
31. REMOVE REAR SEAT SIDE COVER RH