RX 330 AWD V6-3.3L (3MZ-FE) (2004)
HINT: Tape the screwdriver tip before use.
b. Disconnect the room lamp connector.
37. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH
a. Using a screwdriver, disengage the claws and remove the bezel.
HINT: Tape the screwdriver tip before use.
b. Using a screwdriver, disengage the claws and remove the hole cover.
HINT: Tape the screwdriver tip before use.
c. Remove the 3 bolts.
d. Using a clip remover, remove the 3 clips.
e. Using a screwdriver, disengage the 8 clips and remove the roof side garnish.
HINT: Tape the screwdriver tip before use.
38. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH
HINT: Use the same procedures described for the RH side.
39. REMOVE ROOM LAMP ASSEMBLY NO. 1